Alabama Road Signs Test
- 40 road signs
- 20 per round
- Misses come back first
-
Road signsSign 1 of 20
You want to turn left at a solid green light and see this sign. What should you do?
- AWait for a green arrow to turn
- BTurn when there is a safe gap
- CTurn only with a police officer's help
- DTurn now; oncoming cars must stop
Show answer and explanation
Answer: B. Turn when there is a safe gap
This sign is posted next to a signal to clarify the left turn. On a solid green light you may turn left, but the turn is not protected. Oncoming vehicles also have a green light, so yield to them and to pedestrians, and turn only when there is a gap large enough to finish the turn safely.
Why not A? A solid green light lets you turn; you do not need an arrow here.
Why not C? The sign means wait for the green arrow.
Why not D? Oncoming traffic has a green light too, so you must yield to it.
Source: California MUTCD, “Traffic Signal Signs and Plaques (R10-5 through R10-30),” p. 215 · Review this topic
-
Road signsSign 2 of 20
What does this sign mean?
- AYou will have automatic priority
- BA yield sign is ahead
- CA freeway exit is closed
- DA stop is required at this warning sign in every case
Show answer and explanation
Answer: B. A yield sign is ahead
The warning identifies a YIELD sign ahead. Prepare to reduce speed and give way at the controlled location, stopping if safety requires it. The advance warning does not itself give you priority, and it is not a rule that every vehicle must stop precisely at this warning sign.
Why not A? The upcoming YIELD control means you must give way when required.
Why not C? There is no closed-exit message on the yield-ahead warning.
Why not D? The warning identifies a control ahead; it does not require every vehicle to stop here.
Source: Alabama Driver Manual, “Printed page 46,” p. 46 · Review this topic
-
Road signsSign 3 of 20
What does this sign tell you to do?
- ASlow down and be ready to stop
- BCome to a full stop every time
- CStop completely every time
- DGo first; others must yield to you
Show answer and explanation
Answer: A. Slow down and be ready to stop
A YIELD sign means slow down and be ready to stop to let any vehicle, bicyclist, or pedestrian pass before you proceed. You do not have to stop when the way is clear, but anyone already coming has the right-of-way over you. Treat it as giving way, never as a signal to go first.
Why not B? You stop only when you need to let someone pass; if the way is clear you may go.
Why not C? A yield sign means slow down and be ready to stop.
Why not D? YIELD means you let others go first, not the other way around.
Source: DL 600, “Red YIELD Sign,” p. 35 · Review this topic
-
Road signsSign 4 of 20
What should you do when you see this sign?
- ACross quickly if the gates are up
- BCross without slowing if no train is in sight
- CLook, listen, and be ready to stop
- DStop only if the gates are down
Show answer and explanation
Answer: C. Look, listen, and be ready to stop
The X-shaped sign marks a railroad crossing. You are approaching a railroad crossing: look, listen, slow down, and prepare to stop. Let any trains pass before you proceed. Do not rely on gates or lights, because many crossings have only this sign.
Why not A? Look, listen, and be ready to stop.
Why not B? You must slow down and check carefully; trains can be closer and faster than they look.
Why not D? Many crossings have no gates, so you must check for trains yourself.
Source: DL 600, “Yellow and Black Circular Sign or X-shaped Sign,” p. 38 · Review this topic
-
Road signsSign 5 of 20
What does this sign mean?
- AParking is prohibited
- BParking is permitted if you stay inside
- CAll traffic must turn right
- DThe highway ends
Show answer and explanation
Answer: A. Parking is prohibited
The sign prohibits parking in the indicated area. Remaining behind the wheel does not make ordinary parking permissible. It is not a directional arrow or an end-of-road warning. Read any accompanying limits on the actual roadside sign; the pictured symbol itself tells you that parking is restricted.
Why not B? Remaining in the vehicle does not make the prohibited parking allowed.
Why not C? The parking symbol does not direct traffic to turn right.
Why not D? This is a parking restriction, not a highway-end warning.
Source: Alabama Driver Manual, “Printed page 43,” p. 43 · Review this topic
-
Road signsSign 6 of 20
What does this sign mean?
- AA detour follows the arrow's direction
- BThe road is closed in that direction
- CYou must turn the way the arrow points
- DTraffic moves only in the arrow's direction
Show answer and explanation
Answer: D. Traffic moves only in the arrow's direction
A ONE WAY sign is a regulatory sign that shows which way traffic travels on that street. Drive only in the direction of the arrow. It does not tell you to turn and it does not mark a detour. Turning onto the street against the arrow would put you head-on with traffic.
Why not A? The sign is about the direction of traffic on the street, not a detour route.
Why not B? Traffic moves only in the arrow's direction.
Why not C? It does not order a turn; it tells you which way traffic on that street flows.
Source: DL 600, “White Regulatory Signs,” p. 36 · Review this topic
-
Road signsSign 7 of 20
This sign hangs over your lane at an intersection. What must you do?
- ATurn right from this lane
- BTurn left or go straight
- CTurn left only on a green arrow
- DTurn left from this lane
Show answer and explanation
Answer: D. Turn left from this lane
Lane control signs with the word ONLY show the single movement that is required from the lane under them. This one means vehicles in that lane must turn left. If you want to go straight, move into a different lane before you reach the intersection, when it is safe to do so.
Why not A? The sign requires a left turn from this lane.
Why not B? ONLY means the single movement shown is required from this lane.
Why not C? The sign tells you which way to go, not which signal to wait for.
Source: California MUTCD, “Mandatory Movement Lane Control Signs (R3-5, R3-5a, R3-7, R3-19 Series, and R3-20),” p. 184 · Review this topic
-
Road signsSign 8 of 20
Warning signs in this fluorescent yellow-green color are used for hazards related to:
- ARoad work and lane closures
- BRailroad crossings
- CHighway construction only
- DPedestrians, bicyclists and schools
Show answer and explanation
Answer: D. Pedestrians, bicyclists and schools
Some warning signs use a bright fluorescent yellow-green color so they stand out. They warn of conditions related to pedestrians, bicyclists, schools, playgrounds, school buses, and school passenger loading zones. When you see this color, slow down and watch for people walking or riding near the road.
Why not A? Road work signs are orange.
Why not B? Railroad warnings use a round yellow sign with an X.
Why not C? This color marks hazards for pedestrians, bicyclists, and schools.
Source: DL 600, “Warning Signs,” p. 38 · Review this topic
-
Road signsSign 9 of 20
What does this sign mean?
- AMerging traffic
- BTwo-way traffic
- CLane ends
- DAdded lane
Show answer and explanation
Answer: D. Added lane
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a second lane joining in its own lane, which means added lane. A lane joins and continues alongside yours, so nobody needs to merge. Learning each warning symbol lets you react before you reach the hazard.
Why not A? The merging traffic sign shows a side road joining your lane.
Why not B? This sign shows an added lane.
Why not C? The lane ends sign shows two lane lines, one bending in toward the other.
Source: DL 600, “Warning Signs,” p. 37 · Review this topic
-
Road signsSign 10 of 20
What does this sign mean?
- ADo not stop inside the intersection
- BDo not enter the intersection at all
- CAlways stop before the intersection
- DStop and wait inside the intersection
Show answer and explanation
Answer: A. Do not stop inside the intersection
DO NOT BLOCK INTERSECTION is a white regulatory sign. It means you must not stop inside the intersection. If traffic is backed up and there is not enough room to get completely across, wait before the intersection until space opens up. When there is room, you may cross normally without stopping.
Why not B? You may cross when there is room to clear the intersection completely.
Why not C? You do not have to stop when there is room on the other side.
Why not D? Do not stop inside the intersection.
Source: DL 600, “White Regulatory Signs,” p. 36 · Review this topic
-
Road signsSign 11 of 20
What does this sign mean?
- ARailroad crossing ahead
- BSchool zone
- CPedestrian crossing
- DTraffic signal ahead
Show answer and explanation
Answer: C. Pedestrian crossing
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a walking person, which means pedestrian crossing. Watch for people crossing the road ahead. Learning each warning symbol lets you react before you reach the hazard.
Why not A? This sign shows a pedestrian crossing.
Why not B? The school zone sign shows a five-sided shape with two children.
Why not D? The traffic signal ahead sign shows a traffic light.
Source: DL 600, “Warning Signs,” p. 37 · Review this topic
-
Road signsSign 12 of 20
You are stopped at a red light and want to turn right. You see this sign. What should you do?
- AWait for the light to turn green
- BTurn after checking for pedestrians only
- CTurn if no pedestrians are waiting
- DTurn after a full stop if the way is clear
Show answer and explanation
Answer: A. Wait for the light to turn green
Where turning right on red is allowed, you may turn after stopping when it is safe. A NO TURN ON RED sign is used where that turn is prohibited, often because of poor sight distance or many pedestrians. Stay stopped until the signal turns green, then turn while yielding to pedestrians and other traffic.
Why not B? The sign means wait for the green light.
Why not C? The sign applies whether or not anyone is crossing.
Why not D? This sign takes away a right turn on red, even when the way is clear.
Source: California MUTCD, “No Turn on Red Signs (R10-11 Series, R10-17a, and R10-30),” p. 216 · Review this topic
-
Road signsSign 13 of 20
What does this sign mean?
- AThe road has two sharp turns
- BA hospital entrance is ahead
- CA railroad crossing is ahead
- DPassing is required before the sign
Show answer and explanation
Answer: C. A railroad crossing is ahead
The round railroad warning identifies tracks ahead. Slow down, look carefully in both directions and be ready to stop. It is an advance warning, not permission to race a train. Watch the crossing’s actual gates, lights and other controls as you approach and keep the vehicle clear of the tracks.
Why not A? The round railroad symbol identifies tracks, not two sharp road bends.
Why not B? Service guidance for a hospital is different from a railroad warning.
Why not D? Prepare to slow, look and stop if necessary; the sign does not require passing.
Source: Alabama Driver Manual, “Printed page 47,” p. 47 · Review this topic
-
Road signsSign 14 of 20
What does this sign mean?
- AThe next lane is reserved for parking
- BA stop sign has been removed
- CThe road has no controls
- DTraffic signals are ahead
Show answer and explanation
Answer: D. Traffic signals are ahead
The sign warns that traffic signals control a location ahead. Prepare to observe and obey the actual indication when you reach it. The colors pictured on the warning are not a live signal granting a green movement; the sign tells you to expect the signal installation.
Why not A? The traffic-light symbol does not designate a parking lane.
Why not B? The warning announces traffic signals, not removal of a stop sign.
Why not C? It expressly warns that a signal control is ahead.
Source: Alabama Driver Manual, “Printed page 48,” p. 48 · Review this topic
-
Road signsSign 15 of 20
What does this sign mean?
- ACurve to the right ahead
- BT intersection ahead
- CWinding road ahead
- DSlippery when wet
Show answer and explanation
Answer: C. Winding road ahead
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows an S-shaped arrow, which means winding road ahead. A series of curves is ahead, so slow down. Learning each warning symbol lets you react before you reach the hazard.
Why not A? The curve to the right ahead sign shows a single arrow bending to one side.
Why not B? This sign shows a winding road.
Why not D? The slippery when wet sign shows a car with wavy skid marks behind it.
Source: DL 600, “Warning Signs,” p. 37 · Review this topic
-
Road signsSign 16 of 20
What does this sign mean?
- AThe road may be slippery when wet
- BCurves are prohibited
- CAll vehicles must weave
- DThe road is always dry
Show answer and explanation
Answer: A. The road may be slippery when wet
The skidding-car symbol warns that the surface may be slippery when wet. Adjust speed and avoid demanding abrupt vehicle movements when grip is reduced. The wavy tracks are a warning illustration, not an instruction to weave from side to side or proof that the road is safe at any speed when dry.
Why not B? The skidding tracks warn about grip, not a ban on curved roads.
Why not C? The wavy tracks illustrate loss of traction; do not imitate them.
Why not D? The message specifically warns about wet conditions.
Source: Alabama Driver Manual, “Printed page 49,” p. 49 · Review this topic
-
Road signsSign 17 of 20
What does this sign tell you to do?
- AUse only the right lane ahead
- BDo not change lanes until it is allowed
- CMerge into one lane ahead
- DMerge left when you see it
Show answer and explanation
Answer: B. Do not change lanes until it is allowed
A STAY IN LANE sign is used on roads with several lanes to direct drivers to stay in their lane until conditions allow a lane change. It is usually paired with solid double white lane lines, which also mean no lane changes. Wait until the lines become broken before you move over.
Why not A? It does not pick a lane; it tells you to stay in the one you are in.
Why not C? Lane merges are shown on yellow warning signs.
Why not D? This sign says to stay in lane until the solid line ends.
Source: California MUTCD, “STAY IN LANE Sign (R4-9),” p. 192 · Review this topic
-
Road signsSign 18 of 20
What does this sign mean?
- ABoth lanes move only in your direction
- BExpect opposing traffic on a two-way roadway
- CPassing is required
- DThe highway is closed
Show answer and explanation
Answer: B. Expect opposing traffic on a two-way roadway
The opposing arrows warn of two-way traffic. You may be leaving a separated one-way roadway, or the sign may remind you that opposing traffic uses the road. Do not treat the adjoining opposing lane as another same-direction lane merely because the previous road section was divided.
Why not A? The opposing arrows indicate that traffic also comes toward you.
Why not C? A two-way warning does not authorize or require a pass.
Why not D? The road remains open; its directional arrangement is the subject of the warning.
Source: Alabama Driver Manual, “Printed page 48,” p. 48 · Review this topic
-
Road signsSign 19 of 20
What does this sign mean?
- AAdded lane
- BDivided highway begins
- CTwo-way traffic
- DLane ends
Show answer and explanation
Answer: C. Two-way traffic
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows two arrows pointing in opposite directions, which means two-way traffic. Traffic will travel in both directions ahead. Learning each warning symbol lets you react before you reach the hazard.
Why not A? The added lane sign shows a second lane joining in its own lane.
Why not B? The divided highway begins sign shows the road splitting around a center island.
Why not D? This sign shows two-way traffic.
Source: DL 600, “Warning Signs,” p. 37 · Review this topic
-
Road signsSign 20 of 20
What does this sign mean?
- AWorkers are forbidden from entering the road
- BA railroad engine is ahead
- CA permanent passing lane begins
- DA flagger is ahead
Show answer and explanation
Answer: D. A flagger is ahead
The orange warning identifies a flagger ahead in a work area. Prepare to follow the traffic direction given at the site, including stopping when instructed. It is not a sign that drivers may choose their own path through the work or continue simply because their original travel lane looked open.
Why not A? The warning announces a worker directing traffic ahead.
Why not B? The person holding a flag represents a traffic flagger, not a train.
Why not C? A flagger warning concerns work-zone traffic control, not a permanent passing lane.
Source: Alabama Driver Manual, “Printed page 50,” p. 50 · Review this topic
Study first
Learn the Alabama road signs
Review 26 selected signs matched to the Alabama manual, then take a 20-question practice round.
Signs test FAQ
Alabama road signs test FAQ
Is this an official separate sign exam?
No. It is a study round from the selected handbook sign inventory.
Does the gallery include every handbook sign?
No. Read manual pp.41–51 for the full sign illustrations and descriptions.
Checked against the Alabama Driver Manual.
Written from the official handbook and Alabama Law Enforcement Agency. Checked line by line against the official handbook and state law.
Last checked Oct 2026