menu

You should use your high-beam headlights

Correct answer

  • when you drive on unfamiliar roads.
  • when you drive in construction areas.
  • where there may be people alongside the road.

Explanation

Use your high beams on unfamiliar roads, in construction areas, or where there may be people alongside the road and where there are no oncoming vehicles. High beams let you see twice as far as low beams. However, use low beams when driving in fog, rain, or snow because they can reflect the high beams back and cause glare.

Pass your driving permit test on the first try... for free!

Search all Question & Answers

Related questions

You are parked facing uphill on a two-way street with no curb. Which way should you turn your front wheels?
Where there are both a solid and a dashed yellow line between opposing lanes of traffic, you must NOT pass
If a bicycle on your right reaches an uncontrolled intersection (i.e., one without signs or signals) at about the same time as you do, you should
While driving on a two-lane roadway, you may pass the vehicle in front of you if
Expressways have “expressway entrance lanes” (acceleration lanes) so that drivers can:
In Washington State, the maximum speed limit on state highways is _______ unless otherwise posted.
When you see a yield sign as you enter a road, you must _________ at the sign.
On some roadways, lanes reserved as “Transit” are used for
Where there are both a solid and a broken yellow line between opposing lanes of traffic, you may NOT pass
When you are approaching a drawbridge with a red signal, you must