Skip to content
Connecticut

Connecticut Road Signs Test

Practice identifying road signs for your Connecticut permit test, with every answer explained.

  1. Road signsSign 1 of 20
    Road sign shown in the question

    What does the pictured pair of opposite arrows warn you about?

    1. ATwo lanes reserved for the same direction
    2. BA choice of either direction on your side
    3. CTraffic traveling in both directions
    4. DA required lane change to the left
    Show answer and explanation

    Answer: C. Traffic traveling in both directions

    Expect opposing traffic on a two-way roadway. The opposing arrows warn that traffic can approach from the other direction. Follow your proper lane and pay attention to center-line markings. Do not assume that the roadway ahead continues to have the separate one-way carriageways of the divided road you are leaving.

    Why not A? The pictured two-way traffic sign does not mean “two lanes reserved for the same direction”. Expect opposing traffic on a two-way roadway.

    Why not B? The pictured two-way traffic sign does not mean “a choice of either direction on your side”. Expect opposing traffic on a two-way roadway.

    Why not D? The pictured two-way traffic sign does not mean “a required lane change to the left”. Expect opposing traffic on a two-way roadway.

    Source: Connecticut Driver's Manual, “Printed page 49,” p. 49 · Review this topic

  2. Road signsSign 2 of 20
    Road sign shown in the question

    What does the pictured round sign with RR warn you about?

    1. AA railroad crossing ahead
    2. BA school zone
    3. CA no-passing zone
    4. DA roundabout ahead
    Show answer and explanation

    Answer: A. A railroad crossing ahead

    Expect a railroad crossing ahead of this round warning sign. This circular warning appears before the tracks. Look ahead for the crossing and any gates, lights or other controls there. The sign does not promise that trains will be absent or that the tracks can be crossed without checking for a clear path.

    Why not B? The pictured railroad advance warning sign does not mean “a school zone”. Expect a railroad crossing ahead of this round warning sign.

    Why not C? The pictured railroad advance warning sign does not mean “a no-passing zone”. Expect a railroad crossing ahead of this round warning sign.

    Why not D? The pictured railroad advance warning sign does not mean “a roundabout ahead”. Expect a railroad crossing ahead of this round warning sign.

    Source: Connecticut Driver's Manual, “Printed page 52,” p. 52 · Review this topic

  3. Road signsSign 3 of 20
    White vertical rectangle with black lettering in three lines

    Traffic is backed up and your exit is close. You see this sign. What may you do?

    1. ADrive on the shoulder to reach the exit
    2. BStay in a lane and wait
    3. CUse the shoulder if you signal first
    4. DPass traffic on the shoulder
    Show answer and explanation

    Answer: B. Stay in a lane and wait

    The DO NOT DRIVE ON SHOULDER sign tells drivers that using the shoulder as a travel lane is prohibited. The shoulder is kept clear for emergencies and stopped vehicles. Stay in your lane, even in slow traffic, and leave the shoulder for emergency vehicles and drivers who need to pull over.

    Why not A? The sign forbids using the shoulder as a travel lane, even for a short way.

    Why not C? Signaling does not make driving on the shoulder legal.

    Why not D? Stay in a lane and wait.

    Source: California MUTCD, “DO NOT DRIVE ON SHOULDER Sign (R4-17) and DO NOT PASS ON SHOULDER,” p. 193 · Review this topic

  4. Road signsSign 4 of 20
    Yellow diamond-shaped sign showing two roads joining around the end of a center island

    What does this sign mean?

    1. ADivided highway begins
    2. BLane ends
    3. CAdded lane
    4. DDivided highway ends
    Show answer and explanation

    Answer: D. Divided highway ends

    Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows two roadways coming together after a center island, which means divided highway ends. The median ends and traffic will soon travel on both sides of you. Learning each warning symbol lets you react before you reach the hazard.

    Why not A? The divided highway begins sign shows the road splitting around a center island.

    Why not B? The lane ends sign shows two lane lines, one bending in toward the other.

    Why not C? This sign shows a divided highway ending.

    Source: DL 600, “Warning Signs,” p. 37 · Review this topic

  5. Road signsSign 5 of 20
    Road sign shown in the question

    What restriction does the pictured sign establish?

    1. APass if the vehicle ahead is slow
    2. BUse the shoulder for passing
    3. CDo not pass another vehicle here
    4. DPass only after sounding the horn
    Show answer and explanation

    Answer: C. Do not pass another vehicle here

    Do not pass another vehicle where this DO NOT PASS sign applies. A slow vehicle ahead does not cancel the restriction. Limited sight distance or other hazards can make a passing maneuver unsafe even when the road looks clear nearby. Continue behind the vehicle until passing is permitted and sufficient safe space exists.

    Why not A? The pictured do not pass sign does not mean “pass if the vehicle ahead is slow”. Do not pass another vehicle where this DO NOT PASS sign applies.

    Why not B? The pictured do not pass sign does not mean “use the shoulder for passing”. Do not pass another vehicle where this DO NOT PASS sign applies.

    Why not D? The pictured do not pass sign does not mean “pass only after sounding the horn”. Do not pass another vehicle where this DO NOT PASS sign applies.

    Source: Connecticut Driver's Manual, “Printed page 48,” p. 48 · Review this topic

  6. Road signsSign 6 of 20
    Red eight-sided sign with white border and white lettering

    What must you do when you reach this sign?

    1. ASlow down and go if no one is coming
    2. BKeep moving if no cars are visible
    3. CStop fully, then go when it is safe
    4. DStop only if other cars are there
    Show answer and explanation

    Answer: C. Stop fully, then go when it is safe

    A STOP sign means make a full stop before entering the crosswalk or at the limit line. If there is no limit line or crosswalk, stop before entering the intersection. After stopping, look for traffic and pedestrians and go only when it is safe. The stop is required every time, whether or not anyone else is there.

    Why not A? Slowing without stopping is a rolling stop, which a STOP sign does not allow.

    Why not B? A stop sign requires a full stop.

    Why not D? You must stop every time, even when no other traffic is present.

    Source: DL 600, “STOP Sign,” p. 35 · Review this topic

  7. Road signsSign 7 of 20
    Road sign shown in the question

    What does this pictured warning sign indicate?

    1. AAn optional parking area
    2. BA stop sign ahead
    3. CA freeway entrance
    4. DThe end of a speed limit
    Show answer and explanation

    Answer: B. A stop sign ahead

    Slow down and prepare for a stop sign ahead. The small stop-sign symbol and upward arrow give advance notice of the control ahead. Begin preparing early so you can make a controlled stop at the required location. This advance warning does not replace the stop sign or the stopping point at the intersection.

    Why not A? The pictured stop ahead sign does not mean “an optional parking area”. Slow down and prepare for a stop sign ahead.

    Why not C? The pictured stop ahead sign does not mean “a freeway entrance”. Slow down and prepare for a stop sign ahead.

    Why not D? The pictured stop ahead sign does not mean “the end of a speed limit”. Slow down and prepare for a stop sign ahead.

    Source: Connecticut Driver's Manual, “Printed page 49,” p. 49 · Review this topic

  8. Road signsSign 8 of 20
    Yellow diamond-shaped sign showing a straight arrow with a second line joining it from the left

    What does this sign mean?

    1. ALane ends
    2. BDivided highway begins
    3. CAdded lane
    4. DMerging traffic
    Show answer and explanation

    Answer: D. Merging traffic

    Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a side road joining your lane, which means merging traffic. Traffic will merge into your lane from the side, so watch for it. Learning each warning symbol lets you react before you reach the hazard.

    Why not A? The lane ends sign shows two lane lines, one bending in toward the other.

    Why not B? This sign shows merging traffic.

    Why not C? The added lane sign shows a second lane joining in its own lane.

    Source: DL 600, “Warning Signs,” p. 37 · Review this topic

  9. Road signsSign 9 of 20
    Red circle on a white square with a white horizontal bar and white lettering

    What does this sign mean?

    1. ADo not enter this road or ramp
    2. BDo not stop in the intersection
    3. COne-way road; enter slowly
    4. DGo in one direction only
    Show answer and explanation

    Answer: A. Do not enter this road or ramp

    DO NOT ENTER is a red and white regulatory sign. Follow its instruction: do not enter the road or ramp where the sign is posted. It faces drivers who would otherwise be going against traffic. If you see it in front of you, do not drive past it; choose another route instead.

    Why not B? Stopping in an intersection is covered by the DO NOT BLOCK INTERSECTION sign.

    Why not C? The sign forbids entering at all; it does not allow a slow entry.

    Why not D? The sign means do not enter.

    Source: DL 600, “Red and White Regulatory Sign,” p. 38 · Review this topic

  10. Road signsSign 10 of 20
    White vertical rectangle with black lettering and numbers

    Signs shaped like this white rectangle generally:

    1. AWarn of hazards ahead
    2. BMark the edge of the road
    3. CGive directions to places
    4. DState rules you must obey
    Show answer and explanation

    Answer: D. State rules you must obey

    White rectangular signs communicate many important rules you must obey, such as speed limits and parking rules. Warnings about road conditions and hazards are on diamond-shaped signs. Learning the shapes helps you tell what kind of sign you are approaching before you are close enough to read it.

    Why not A? Hazard warnings are on yellow diamond-shaped signs.

    Why not B? White rectangles state rules you must obey.

    Why not C? Directions are on guide signs.

    Source: DL 600, “White Rectangular Sign,” p. 38 · Review this topic

  11. Road signsSign 11 of 20
    Round yellow sign with a large black X and two letters R

    What does this sign mean?

    1. ARailroad crossing ahead
    2. BDetour ahead
    3. CRoad closed ahead
    4. DCrossroad ahead
    Show answer and explanation

    Answer: A. Railroad crossing ahead

    A yellow and black circular sign means you are approaching a railroad crossing. Look, listen, slow down, and prepare to stop. Let any trains pass before you proceed. It is posted before the crossing so you have time to slow down and check for trains in both directions.

    Why not B? This sign means railroad crossing ahead.

    Why not C? It warns of a railroad crossing; it does not say the road is closed.

    Why not D? The round sign marks a railroad crossing, not an intersection with another road.

    Source: DL 600, “Yellow and Black Circular Sign or X-shaped Sign,” p. 38 · Review this topic

  12. Road signsSign 12 of 20
    Yellow diamond-shaped sign showing a black plus sign

    What does this sign mean?

    1. ARailroad crossing ahead
    2. BT intersection ahead
    3. CStop sign ahead
    4. DCrossroad ahead
    Show answer and explanation

    Answer: D. Crossroad ahead

    Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a plus sign, which means crossroad ahead. Another road crosses yours ahead, so watch for vehicles entering from either side. Learning each warning symbol lets you react before you reach the hazard.

    Why not A? The railroad crossing ahead sign shows a round sign with an X.

    Why not B? The t intersection ahead sign shows a T shape.

    Why not C? This sign means a crossroad ahead.

    Source: DL 600, “Warning Signs,” p. 37 · Review this topic

  13. Road signsSign 13 of 20
    White vertical rectangle with black lettering in three lines

    You see this sign after a stretch of two-lane road where passing was not allowed. What does it mean?

    1. AA passing lane ends
    2. BA no-passing zone begins here
    3. CYou may now pass on the right
    4. DThe no-passing zone has ended
    Show answer and explanation

    Answer: D. The no-passing zone has ended

    A PASS WITH CARE sign is placed at the far end of a no-passing zone that began with a DO NOT PASS sign. It tells you passing is allowed again. You still must pass only when you can see far enough ahead and have enough room to return to your lane safely.

    Why not A? This sign means the no-passing zone has ended.

    Why not B? The start of a no-passing zone is marked with a DO NOT PASS sign.

    Why not C? It ends the no-passing zone; passing is still done on the left.

    Source: California MUTCD, “PASS WITH CARE Sign (R4-2),” p. 190 · Review this topic

  14. Road signsSign 14 of 20
    Yellow diamond-shaped sign showing two lines, one bending in toward the other

    What does this sign mean?

    1. ADivided highway begins
    2. BAdded lane
    3. CLane ends
    4. DDivided highway ends
    Show answer and explanation

    Answer: C. Lane ends

    Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows two lane lines, one bending in toward the other, which means lane ends. One lane ends ahead, so drivers in it must merge. Learning each warning symbol lets you react before you reach the hazard.

    Why not A? This sign shows the lane ending.

    Why not B? The added lane sign shows a second lane joining in its own lane.

    Why not D? The divided highway ends sign shows two roadways coming together after a center island.

    Source: DL 600, “Warning Signs,” p. 37 · Review this topic

  15. Road signsSign 15 of 20
    Road sign shown in the question

    What situation does the pictured merging arrow warn about?

    1. AA road ending at a T intersection
    2. BA lane reserved only for bicycles
    3. CA required U-turn ahead
    4. DTraffic streams joining together
    Show answer and explanation

    Answer: D. Traffic streams joining together

    Expect traffic streams to merge into one. Watch for vehicles joining the traffic stream and choose a suitable gap and speed. The drawing warns of converging paths, not a lane that remains separate throughout. Merge smoothly with attention to the road markings and the position of other drivers.

    Why not A? The pictured merge sign does not mean “a road ending at a t intersection”. Expect traffic streams to merge into one.

    Why not B? The pictured merge sign does not mean “a lane reserved only for bicycles”. Expect traffic streams to merge into one.

    Why not C? The pictured merge sign does not mean “a required u-turn ahead”. Expect traffic streams to merge into one.

    Source: Connecticut Driver's Manual, “Printed page 49,” p. 49 · Review this topic

  16. Road signsSign 16 of 20
    Road sign shown in the question

    What change does the pictured sign warn you to expect?

    1. AA new lane continuing beside yours
    2. BA railroad crossing
    3. CA lane reduction ahead
    4. DA change to a one-way parking aisle
    Show answer and explanation

    Answer: C. A lane reduction ahead

    Prepare for a reduction in the number of lanes. Watch the lane markings and traffic before choosing a safe response. A driver in the ending lane may need to merge, while a driver in the continuing lane should be ready for that movement. The sign does not give either driver permission to force a conflict.

    Why not A? The pictured lane reduction sign does not mean “a new lane continuing beside yours”. Prepare for a reduction in the number of lanes.

    Why not B? The pictured lane reduction sign does not mean “a railroad crossing”. Prepare for a reduction in the number of lanes.

    Why not D? The pictured lane reduction sign does not mean “a change to a one-way parking aisle”. Prepare for a reduction in the number of lanes.

    Source: Connecticut Driver's Manual, “Printed page 49,” p. 49 · Review this topic

  17. Road signsSign 17 of 20
    White vertical rectangle with red lettering and red border

    What does this sign mean?

    1. AParking is allowed for as long as you like
    2. BYou may not park here at any time
    3. CYou may park here for a limited time
    4. DParking is allowed only at night
    Show answer and explanation

    Answer: B. You may not park here at any time

    This white regulatory sign with red letters says NO PARKING ANY TIME. White rectangular signs communicate rules you must obey, and this one means you may not park in that spot at any hour. Signs that allow limited parking show times or hours, which this sign does not.

    Why not A? This sign means no parking at any time.

    Why not C? Limited-time parking signs list the hours or minutes allowed.

    Why not D? ANY TIME means day and night.

    Source: DL 600, “White Regulatory Signs,” p. 36 · Review this topic

  18. Road signsSign 18 of 20
    White vertical rectangle with black lettering in two lines

    You see this sign on a two-lane road. What does it mean?

    1. APass only on the right
    2. BPass only if no oncoming car is in sight
    3. CDo not pass other vehicles here
    4. DPass only when no signs are posted
    Show answer and explanation

    Answer: C. Do not pass other vehicles here

    The DO NOT PASS sign is placed at the start of, and along, a zone where sight distance is restricted or where other conditions make passing unsafe. It backs up the no-passing pavement markings. Stay behind the vehicle ahead until the zone ends and you can see far enough ahead to pass safely.

    Why not A? The sign bars pulling into the oncoming lane to pass; it doesn't make passing on the right allowed.

    Why not B? The zone is marked because you cannot see far enough to pass safely, even if the road looks clear.

    Why not D? This sign means do not pass.

    Source: California MUTCD, “DO NOT PASS Sign (R4-1),” p. 190 · Review this topic

  19. Road signsSign 19 of 20
    White vertical rectangle with black lettering in three lines

    You are stopped at a red light and want to turn right. You see this sign. What should you do?

    1. ATurn after a full stop if the way is clear
    2. BTurn after checking for pedestrians only
    3. CTurn if no pedestrians are waiting
    4. DWait for the light to turn green
    Show answer and explanation

    Answer: D. Wait for the light to turn green

    Where turning right on red is allowed, you may turn after stopping when it is safe. A NO TURN ON RED sign is used where that turn is prohibited, often because of poor sight distance or many pedestrians. Stay stopped until the signal turns green, then turn while yielding to pedestrians and other traffic.

    Why not A? This sign takes away a right turn on red, even when the way is clear.

    Why not B? The sign means wait for the green light.

    Why not C? The sign applies whether or not anyone is crossing.

    Source: California MUTCD, “No Turn on Red Signs (R10-11 Series, R10-17a, and R10-30),” p. 216 · Review this topic

  20. Road signsSign 20 of 20
    Road sign shown in the question

    What maximum speed is displayed on the pictured regulatory sign?

    1. A15 mph
    2. B35 mph
    3. C45 mph
    4. D25 mph
    Show answer and explanation

    Answer: D. 25 mph

    The posted number identifies the maximum speed for the roadway. Read the number on the actual sign rather than carrying a limit over from a different road. This illustration displays 25. The number is a maximum, not a promise that this speed is safe in poor visibility, heavy traffic or slippery conditions.

    Why not A? The pictured speed limit sign does not mean “15 mph”. The posted number identifies the maximum speed for the roadway.

    Why not B? The pictured speed limit sign does not mean “35 mph”. The posted number identifies the maximum speed for the roadway.

    Why not C? The pictured speed limit sign does not mean “45 mph”. The posted number identifies the maximum speed for the roadway.

    Source: Connecticut Driver's Manual, “Printed page 48,” p. 48 · Review this topic

Study first

Learn the Connecticut road signs

Study the sign meanings shown in the Connecticut manual.

All Connecticut road signs

Signs test FAQ

Connecticut road signs test FAQ

Is this an official sign exam?

No. This is a study round from supported handbook signs.

How many are in a round?

10 supported sign questions; no official sign-format approval is implied.

Checked against the Connecticut Driver's Manual.
Written from the official handbook and Connecticut Department of Motor Vehicles. Checked line by line against the official handbook and state law.

Checked line by line against the official handbook and state law
Last checked Oct 2026