Ohio Road Signs Test
Practice identifying road signs for your Ohio permit test, with every answer explained.
-
Road signsSign 1 of 20
What does this sign mean?
- ACurve to the right ahead
- BWinding road ahead
- CRoad narrows ahead
- DT intersection ahead
Show answer and explanation
Answer: A. Curve to the right ahead
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a single arrow bending to one side, which means curve to the right ahead. The road curves ahead, so slow down before the curve. Learning each warning symbol lets you react before you reach the hazard.
Why not B? The winding road ahead sign shows an S-shaped arrow.
Why not C? This sign shows a curve to the right ahead.
Why not D? The t intersection ahead sign shows a T shape.
Source: Ohio Driver Manual (HSY 7607), “Traffic Signs (p. 11-12),” Section 4 · Review this topic
-
Road signsSign 2 of 20
What does this sign mean?
- ACrossroad ahead
- BT intersection ahead
- CTwo-way traffic
- DWinding road ahead
Show answer and explanation
Answer: B. T intersection ahead
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a T shape, which means t intersection ahead. Your road ends at a crossing road, so be ready to turn. Learning each warning symbol lets you react before you reach the hazard.
Why not A? The crossroad ahead sign shows a plus sign.
Why not C? The two-way traffic sign shows two arrows pointing in opposite directions.
Why not D? This sign shows a T intersection ahead.
Source: DL 600, “Warning Signs,” p. 37 · Review this topic
-
Road signsSign 3 of 20
This sign is posted for the center lane of a street. How may you use that lane?
- ATo pass slower vehicles
- BOnly to start a left turn or U-turn
- CTo drive in for several blocks
- DTo drive in until your turn comes up
Show answer and explanation
Answer: B. Only to start a left turn or U-turn
This sign marks a center lane shared by drivers turning left from either direction. Use it only to prepare for and make a left turn or U-turn, not for passing or through travel, and drive no more than 200 feet in it. Watch for drivers coming the other way who may be using the same lane.
Why not A? The center turn lane is not used for passing.
Why not C? The center lane is only for starting a left turn or U-turn.
Why not D? It is not a through lane; use it only to prepare for and make your turn, for no more than 200 feet.
Source: DL 600, “Center Left Turn Lanes,” p. 16 · Review this topic
-
Road signsSign 4 of 20
You see this sign at a ramp leaving a long, steep downhill road. What does it mean?
- AAny vehicle may park there
- BTrucks may rest on the ramp
- COnly runaway vehicles may use it
- DSlow vehicles may pull off there
Show answer and explanation
Answer: C. Only runaway vehicles may use it
This sign is placed near the entrance to a truck escape ramp, also called a runaway truck ramp. The ramp is for vehicles that have lost their brakes on a steep grade. The sign discourages other drivers from entering it, and you should never stop in the path of a runaway truck.
Why not A? The ramp is only for runaway vehicles.
Why not B? The ramp is an escape route, not a rest stop.
Why not D? Pulling onto the ramp could block a truck whose brakes have failed.
Source: California MUTCD, “RUNAWAY VEHICLES ONLY Sign (R4-10),” p. 192 · Review this topic
-
Road signsSign 5 of 20
Signs with a red circle and a red line through a picture, like this one, mean:
- AThe action shown is allowed with care
- BThe action shown is not allowed
- CThe action shown is allowed at night
- DThe action shown is required ahead
Show answer and explanation
Answer: B. The action shown is not allowed
A red circle with a red line through it means the picture inside shows something you cannot do. The sign may also include words. This one forbids right turns, and the same design is used for no left turn, no U-turn, and other prohibitions, so you can understand them even without reading.
Why not A? The red line means the action is forbidden, not allowed with care.
Why not C? A red circle with a slash means the action is not allowed.
Why not D? It forbids the action shown; it never requires it.
Source: Ohio Driver Manual (HSY 7607), “Traffic Signs (p. 11-12),” Section 4 · Review this topic
-
Road signsSign 6 of 20
What does this sign mean?
- AMerging traffic
- BDivided highway begins
- CAdded lane
- DLane ends
Show answer and explanation
Answer: A. Merging traffic
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a side road joining your lane, which means merging traffic. Traffic will merge into your lane from the side, so watch for it. Learning each warning symbol lets you react before you reach the hazard.
Why not B? This sign shows merging traffic.
Why not C? The added lane sign shows a second lane joining in its own lane.
Why not D? The lane ends sign shows two lane lines, one bending in toward the other.
Source: DL 600, “Warning Signs,” p. 37 · Review this topic
-
Road signsSign 7 of 20
What does this sign mean?
- ATraffic moves only in the arrow's direction
- BThe road is closed in that direction
- CYou must turn the way the arrow points
- DA detour follows the arrow's direction
Show answer and explanation
Answer: A. Traffic moves only in the arrow's direction
A ONE WAY sign is a regulatory sign that shows which way traffic travels on that street. Drive only in the direction of the arrow. It does not tell you to turn and it does not mark a detour. Turning onto the street against the arrow would put you head-on with traffic.
Why not B? Traffic moves only in the arrow's direction.
Why not C? It does not order a turn; it tells you which way traffic on that street flows.
Why not D? The sign is about the direction of traffic on the street, not a detour route.
Source: DL 600, “White Regulatory Signs,” p. 36 · Review this topic
-
Road signsSign 8 of 20
What does this sign mean?
- ARailroad crossing ahead
- BSchool zone
- CPedestrian crossing
- DTraffic signal ahead
Show answer and explanation
Answer: C. Pedestrian crossing
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a walking person, which means pedestrian crossing. Watch for people crossing the road ahead. Learning each warning symbol lets you react before you reach the hazard.
Why not A? This sign shows a pedestrian crossing.
Why not B? The school zone sign shows a five-sided shape with two children.
Why not D? The traffic signal ahead sign shows a traffic light.
Source: Ohio Driver Manual (HSY 7607), “Traffic Signs (p. 11-12),” Section 4 · Review this topic
-
Road signsSign 9 of 20
What does this sign mean?
- ADivided highway ends
- BDivided highway begins
- CNarrow bridge ahead
- DTwo-way traffic
Show answer and explanation
Answer: B. Divided highway begins
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows the road splitting around a center island, which means divided highway begins. The road will split around a median ahead. Learning each warning symbol lets you react before you reach the hazard.
Why not A? The divided highway ends sign shows two roadways coming together after a center island.
Why not C? This sign means divided highway begins.
Why not D? The two-way traffic sign shows two arrows pointing in opposite directions.
Source: DL 600, “Warning Signs,” p. 37 · Review this topic
-
Road signsSign 10 of 20
You see this emblem on the back of a farm tractor ahead. What does it tell you?
- AThe vehicle carries hazardous materials
- BIt marks a slow-moving vehicle: slow down and judge its speed
- CThe vehicle is about to turn left
- DThe vehicle is a school bus
Show answer and explanation
Answer: B. It marks a slow-moving vehicle: slow down and judge its speed
The Ohio Driver Manual says a fluorescent or reflective orange and red triangle on the rear of vehicles drawn by animals, farm equipment, or construction equipment marks a vehicle traveling less than 25 mph. Ohio law (ORC 4513.113) also has some farm equipment built to go faster than 25 mph show the triangle together with a speed identification symbol, so the emblem identifies a slow-moving vehicle, not its exact speed. Slow down early and judge its speed before you pass.
Why not A? The triangle means a slow-moving vehicle, not a hazardous load.
Why not C? The emblem says nothing about turning; watch for signals.
Why not D? School buses use amber and red flashing lights, not this emblem.
Source: Ohio Revised Code, “ORC 4513.113(A) SMV emblem and speed identification symbol,” · Review this topic
-
Road signsSign 11 of 20
What must you do when you reach this sign?
- AStop fully, then go when it is safe
- BKeep moving if no cars are visible
- CSlow down and go if no one is coming
- DStop only if other cars are there
Show answer and explanation
Answer: A. Stop fully, then go when it is safe
A STOP sign means make a full stop before entering the crosswalk or at the limit line. If there is no limit line or crosswalk, stop before entering the intersection. After stopping, look for traffic and pedestrians and go only when it is safe. The stop is required every time, whether or not anyone else is there.
Why not B? A stop sign requires a full stop.
Why not C? Slowing without stopping is a rolling stop, which a STOP sign does not allow.
Why not D? You must stop every time, even when no other traffic is present.
Source: DL 600, “STOP Sign,” p. 35 · Review this topic
-
Road signsSign 12 of 20
What does this sign mean?
- AParking is allowed for as long as you like
- BYou may park here for a limited time
- CParking is allowed only at night
- DYou may not park here at any time
Show answer and explanation
Answer: D. You may not park here at any time
This white regulatory sign with red letters says NO PARKING ANY TIME. White rectangular signs communicate rules you must obey, and this one means you may not park in that spot at any hour. Signs that allow limited parking show times or hours, which this sign does not.
Why not A? This sign means no parking at any time.
Why not B? Limited-time parking signs list the hours or minutes allowed.
Why not C? ANY TIME means day and night.
Source: DL 600, “White Regulatory Signs,” p. 36 · Review this topic
-
Road signsSign 13 of 20
You see this sign on a two-lane road. What does it mean?
- APass only on the right
- BPass only if no oncoming car is in sight
- CDo not pass other vehicles here
- DPass only when no signs are posted
Show answer and explanation
Answer: C. Do not pass other vehicles here
The DO NOT PASS sign is placed at the start of, and along, a zone where sight distance is restricted or where other conditions make passing unsafe. It backs up the no-passing pavement markings. Stay behind the vehicle ahead until the zone ends and you can see far enough ahead to pass safely.
Why not A? The sign bars pulling into the oncoming lane to pass; it doesn't make passing on the right allowed.
Why not B? The zone is marked because you cannot see far enough to pass safely, even if the road looks clear.
Why not D? This sign means do not pass.
Source: California MUTCD, “DO NOT PASS Sign (R4-1),” p. 190 · Review this topic
-
Road signsSign 14 of 20
On a sign like this one, the red circle with a slash represents which word?
- AYIELD
- BNO
- CONLY
- DSTOP
Show answer and explanation
Answer: B. NO
The Ohio Driver Manual says prohibitory signs instruct the viewer that an action is prohibited, and that the red circle with a slash represents the word NO. The picture inside the circle, here a bicycle, shows what is not allowed, so this sign means no bicycles.
Why not A? A yield sign is a red and white triangle, not a circle with a slash.
Why not C? The slash means an action is banned, not that it is the only one allowed.
Why not D? A stop sign is a red octagon.
Source: Ohio Driver Manual (HSY 7607), “Traffic Signs (p. 11-12),” Section 4 · Review this topic
-
Road signsSign 15 of 20
A railroad crossing is marked only with this sign. What should you do?
- ASlow down and be prepared to stop if you see or hear a train
- BAlways come to a full stop at the tracks
- CCross at your normal speed unless gates are down
- DStop only if a flagger is present
Show answer and explanation
Answer: A. Slow down and be prepared to stop if you see or hear a train
The Ohio Driver Manual says a white X-shaped crossbuck sign marks a highway-railroad grade crossing. When a crossing is marked with only pavement markings or crossbuck signs, slow down and be prepared to stop if you see or hear a train approaching. If the crossing also has a stop sign, all vehicles must stop.
Why not B? A full stop is required where there is a stop sign, or for certain vehicles such as school buses.
Why not C? Many crossings have no gates; slow down and look and listen for trains.
Why not D? You do not need a flagger to be careful; slow down and be prepared to stop.
Source: Ohio Driver Manual (HSY 7607), “Railroad Crossings (p. 21),” Section 5 · Review this topic
-
Road signsSign 16 of 20
What does this sign mean?
- ATraffic signal ahead
- BStop sign ahead
- CYield sign ahead
- DSchool zone ahead
Show answer and explanation
Answer: B. Stop sign ahead
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a red octagon above an arrow, which means stop sign ahead. There is a STOP sign ahead, so be ready to stop. Learning each warning symbol lets you react before you reach the hazard.
Why not A? The traffic signal ahead sign shows a traffic light.
Why not C? The yield sign ahead sign shows a red and white triangle above an arrow.
Why not D? This sign means a stop sign ahead.
Source: DL 600, “Warning Signs,” p. 37 · Review this topic
-
Road signsSign 17 of 20
What does this sign mean?
- ANarrow road ahead
- BWinding road ahead
- CCurve to the right ahead
- DSlippery when wet
Show answer and explanation
Answer: D. Slippery when wet
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a car with wavy skid marks behind it, which means slippery when wet. The road may be slippery in rain, so slow down. Learning each warning symbol lets you react before you reach the hazard.
Why not A? This sign warns of a slippery road when wet.
Why not B? The winding road ahead sign shows an S-shaped arrow.
Why not C? The curve to the right ahead sign shows a single arrow bending to one side.
Source: DL 600, “Warning Signs,” p. 37 · Review this topic
-
Road signsSign 18 of 20
What does this sign mean?
- AOne-way road; enter slowly
- BDo not stop in the intersection
- CDo not enter this road or ramp
- DGo in one direction only
Show answer and explanation
Answer: C. Do not enter this road or ramp
DO NOT ENTER is a red and white regulatory sign. Follow its instruction: do not enter the road or ramp where the sign is posted. It faces drivers who would otherwise be going against traffic. If you see it in front of you, do not drive past it; choose another route instead.
Why not A? The sign forbids entering at all; it does not allow a slow entry.
Why not B? Stopping in an intersection is covered by the DO NOT BLOCK INTERSECTION sign.
Why not D? The sign means do not enter.
Source: DL 600, “Red and White Regulatory Sign,” p. 38 · Review this topic
-
Road signsSign 19 of 20
What does this sign tell you to do?
- ADo not change lanes until it is allowed
- BMerge left when you see it
- CMerge into one lane ahead
- DUse only the right lane ahead
Show answer and explanation
Answer: A. Do not change lanes until it is allowed
A STAY IN LANE sign is used on roads with several lanes to direct drivers to stay in their lane until conditions allow a lane change. It is usually paired with solid double white lane lines, which also mean no lane changes. Wait until the lines become broken before you move over.
Why not B? This sign says to stay in lane until the solid line ends.
Why not C? Lane merges are shown on yellow warning signs.
Why not D? It does not pick a lane; it tells you to stay in the one you are in.
Source: California MUTCD, “STAY IN LANE Sign (R4-9),” p. 192 · Review this topic
-
Road signsSign 20 of 20
What does this sign mean?
- ATraffic signal ahead
- BStop sign ahead
- CYield sign ahead
- DMerging traffic
Show answer and explanation
Answer: C. Yield sign ahead
Diamond-shaped signs warn you of specific road conditions and dangers ahead. This one shows a red and white triangle above an arrow, which means yield sign ahead. There is a YIELD sign ahead, so be ready to slow down. Learning each warning symbol lets you react before you reach the hazard.
Why not A? This sign means yield sign ahead.
Why not B? The stop sign ahead sign shows a red octagon above an arrow.
Why not D? The merging traffic sign shows a side road joining your lane.
Source: DL 600, “Warning Signs,” p. 37 · Review this topic
Study first
Learn the Ohio road signs
The BMV says its 40-question knowledge test covers motor vehicle regulations and traffic signs. This test uses the signs in the Ohio Driver Manual.
Signs test FAQ
Ohio road signs test FAQ
What's on this road signs test?
Questions on the signs in the Ohio Driver Manual, such as no left turn, no U-turn and no right turn, yellow diamond warning signs, railroad crossing signs and the slow-moving vehicle emblem.
How many questions are on this signs test?
11 questions per round, one for each manual sign we cover. Signs you miss come back in later rounds until you get them right.
Is this the same as the BMV test?
No. This is practice. The real knowledge test is 40 questions on motor vehicle regulations and traffic signs together, and you need 75% to pass.
What should I do after I pass the signs test?
Move on to the permit practice test, then take the full permit exam until you pass twice in a row.
Checked against the Ohio Driver Manual.
Written from the official handbook and bmv.ohio.gov. Checked line by line against the official handbook and state law.
Checked line by line against the official handbook and state law
Last checked Oct 2026