Railroad Emergency Notification Sign: Meaning and What to Do
Road signs testFreeWritten from your state’s own handbookNo sign-up
What does the railroad emergency notification sign sign mean?
A blue sign with a phone number and the crossing ID. Call it if a vehicle is stuck on the tracks or the crossing signals fail.
Shape
Rectangle
Colors
Blue with white text
Type
Railroad information
Where
At or near the crossing
On the road: what you see and what to do
If something goes wrong at the crossing, get away from the tracks first, then call.
- A vehicle is stuck on the tracks, or the gates or lights fail.
- Get everyone out and away from the tracks.
- Call the number on the blue sign and give the crossing ID.
- For injuries or fire, call 911.
Why this sign matters
The sign sits at or near public railroad crossings, on the crossing signal post or fence. It tells you who to call and gives the crossing’s ID number.
If your vehicle stalls on the tracks and no train is coming, get out and call the number on the crossing posts or control box, then call 911. With a train approaching and the lights flashing, get out immediately and run away from the tracks. (California Driver's Handbook, “Disabled Vehicles on Railroad Tracks,” p. 70)
Remember it
Blue sign, phone number: call it for the crossing. Call 911 for injuries or fire.
Mistakes that cost points
Staying in the vehicle
Get everyone out and away from the tracks right away.
Calling only 911 for a stuck car
The posted number tells the railroad so trains can be stopped. Call 911 for injuries or fire.
Forgetting the crossing ID
Give the crossing ID printed on the sign.
Don’t mix it up with these
The crossbuck is the white X that says yield to trains.
The hospital sign is also blue but has a white H.
A rule sign: never stop on the tracks.
Try it
Road signs make up a section of the permit test, and the questions often show the sign and ask what it means or what to do.
Take the road signs test →In your state
Road signs follow the same national designs in every state. Pick your state to see the road signs in your own driver’s handbook.
Railroad Emergency Notification Sign sign: quick FAQ
When should I use the number on the sign?
If a vehicle is stalled on the tracks, if gates or lights fail, or if there is an obstruction.
Is it a replacement for 911?
No. For injuries or fire, call 911. This number tells the railroad about the crossing so trains can be stopped.
What do I tell them?
Give the crossing ID on the sign and say a vehicle is on the tracks or the signals are not working.
What if a train is coming?
Get out immediately and run away from the tracks, then call 911. (California Driver's Handbook, p. 70)
Keep going
Based on the California MUTCD (2026) and the California Driver's Handbook.
Checked line by line against the official handbook and state law.
Last checked Oct 2026